UAV MANUFACTURERS TRAINING

To obtain a RPC or UAV CC, UAV manufacturers training is required on the type of UAV you propose to operate. The purpose of the manufacturers training is to ensure you understand the construction of a UAV and obtain sufficient knowledge of its flight characteristics to fly it safely.

UAV MANUFACTURERS TRAINING

To obtain a RPC or UAV CC,  you are required to submit proof to CASA that you have completed manufacturers training on the type of UAV you propose to operate.(eg Multirotar). The purpose of the manufacturers training is to ensure you understand the construction of the UAV and obtain sufficient knowledge of its flight characteristics to fly it safely.

Our UAV Manufactures Training

Our UAV manufacturers training consists of 7 parts and is designed to ensure you have  a thorough understand of the UAV to operate it safely. On completion of our UAV manufactures training we provided you with a certificate.

1. Specifications

  1. This looks at the UAV specifications and includes;
    • Flight Controller Details (DJI NAZA-M Lite)
    • Motor & Propeller Selection
    • Transmitter

2. Construction

  1. This looks at the construction of the UAV and includes;
    • Components
    • Tools Needed
    • Mounting Motors & Propellers
    • ESC Soldering & Wiring
    • Top and bottom board installation
    • Flight Controller Wiring
    • Battery Mounting

3. Software Configuration & Installation

This section looks at the UAV Software and installation and includes;

  • Software Configuration
  • Software Installation
  • Software Interface
  • Firmware Upgrade
  • Basic Setup
  • Selecting the Aircraft
  • GPS Mounting Values
  • Testing Receiver/Transmitter
  • Adjusting Gain
  • Setting the Failsafe
  • Setting IOC
  • Setting Voltage Protection

4. Flight

This section looks at preparing the aircraft for flight and the flight test.

  • Pre-flight
  • Digital Compass Calibration
  • Lights
  • Control Modes
  • Test Flight

5. Trouble Shooting

This section looks at troubleshooting and includes:

  • GPS issues
  • TBE (Toilet bowl effect)
  • Recalibration of IMU

6. Theory Assessment

The theory Assessment involves testing your knowledge on what you have learnt.

7. Flight Test

Whilst we are not legally required to assess your flying skills as part of the manufacturers training, we believe this is an essential final component before we sign you off.  There is nothing stressful with this, it is just a short competency demonstration.

Manufacturers Training – Our UAVs

We use the below UAVs for our UAV manufacturers training ;

  • For the under 7kg class we use the DJI F450
  • For the under 20kg class we use the DJI S800 & S900.

Fixed Wing Coming Soon

Contact us for more information